FAQ

Frequently askedquestions

The questions a temple trust or committee is most likely to ask before starting a project.

Starting a project

Who do you work for?

We work for temple trusts, committees and communities, and for companies, townships and individuals that want a temple on their campus. Our projects include Jain derasars, Shiva, Hanuman and goddess temples, and the Ram Janmabhoomi Mandir in Ayodhya. You can see them all on the Projects page.

What should I send you to begin?

A short note is enough: where the temple will stand, which deity and tradition it is for, the stone you prefer (if you have one), the rough size you have in mind, and when you hope to finish. Send drawings and photographs of the site if you have them. We will tell you what is possible, from design alone to a complete turnkey build.

Do you only design, or do you build as well?

Both. We offer temple design and planning, stone carving, transport and installation, or the whole job as one turnkey project. Many of our projects are design-only; others are carving and installation; some, like the Sambhavnath Jain Derasar in Bangkok, were delivered turnkey. Our Services page explains each option.

Can you rebuild or enlarge an existing temple?

Yes. At Becharaji the new temple is rising on the site of the old one while the goddess stays in residence, and at Bhadaj we are designing a larger temple for an existing site beside a historic stepwell. We plan the work around what already stands and what is sacred to the community.

Do you work outside Gujarat?

Yes. We have worked in Rajasthan, Madhya Pradesh, Uttar Pradesh, Maharashtra and Uttarakhand, and our work reaches beyond India to Thailand, Australia and the UAE.

Where are you based, and how do I reach you?

Our office is in Sola, Ahmedabad, open Monday to Saturday, 10 am to 6 pm, and our workshop is in Pindwara, Sirohi, Rajasthan. The quickest way to start is the Contact form.

How can I check your work before I decide?

You can see our completed temples, with photographs and drawings, on the Projects page, and each one shows the stone, the place and the kind of work we did. Our workshop is in Pindwara, Sirohi, Rajasthan.

Can you work with our own consultants or contractor?

Yes. Many trusts already have their own temple contractor or consultants, and we are happy to work alongside them.

Cost

How much does a temple cost?

There is no single figure, because no two temples are alike. The cost depends mainly on the stone, the amount of stone (measured in cubic feet), how dense the carving is, which parts of the work you give us, and where the site is. We give a written estimate once we have seen your brief or drawings.

Which stone is the most economical?

The cheapest stone is not always the most economical. The cost depends on the price of the stone itself, how far it must travel to the site, how much is lost in carving, and how well it holds fine detail. A stone that costs less per cubic foot but chips easily or needs more finishing can cost more in the end. Tell us your budget, tradition and site and we will compare suitable stones for your temple.

Does the amount of carving change the price?

Yes, a great deal. A plain, well-proportioned shrine costs far less than one with carved columns, ceilings, beams and wall figures, because every carved surface takes skilled hours. Tell us how richly you want the temple carved and we will show you where the effort goes.

Is design-only cheaper than turnkey?

Yes, because design-only covers just the design, drawings and visuals, while turnkey also includes the stone, carving, transport and installation. With design-only, you or your own contractor arrange and manage the rest. Turnkey puts the design and the building under one team. Tell us which parts of the work you want from us and we will quote them separately.

How and when do we pay?

Payment is usually made in stages, as the work progresses.

Timeline

How long does it take to build a temple?

Large stone temples take years, not months. The time depends on the size of the temple, how much of it is carved, the stone, the time of year (the monsoon slows quarrying, transport and site work), how ready the site and foundation are, how quickly decisions are made and how promptly payments are released. For example, the Ram Janmabhoomi Mandir in Ayodhya was completed within five years, with the work shared between several contractors.

Where does the time go?

Most of it goes into carving. Every stone is carved by hand or machine to the drawing, numbered, and fitted before it is installed. That is why the design must be settled on paper first: changes after carving begins are slow and costly.

Can the work start before the design is complete?

Usually it is better not to. We can begin ordering and preparing stone while details are finished, but a finished design is what lets us give a reliable programme.

How soon can you give me a schedule?

Once we have seen your brief, drawings and site, we prepare a programme for each stage of the work. A reliable schedule needs the design, the stone and the readiness of the site to be settled, so it comes together with the written estimate.

What can delay a temple?

The common causes are late changes to the design, delays in the site or foundation being ready, funding that arrives in stages, and the monsoon. We will tell you early if we see any of these affecting the schedule.

Stone and steel-free construction

Can a temple be built without steel or cement?

Yes. Traditional Nagara temples are built entirely of stone: carefully dressed blocks laid one on another and held by their own weight and by precise joints, with no steel reinforcement. All our temples are built without steel.

Why would a trust choose a steel-free temple?

Many trusts choose it because it follows the traditional method of temple building, and because stone laid this way does not depend on steel that can rust. A stone temple can stand for centuries, while temples built on steel reinforcement generally last less than a century.

Does steel-free construction cost more or take longer?

It places more weight on design and workmanship. Every joint must be drawn exactly and every stone cut to fit, so the design, the foundation and the carving all need to be planned together. We will say clearly, for your temple, what it changes. Fine craftsmanship is never cheap, but once the temple is complete it stands for centuries and inspires generations to come.

Can a steel-free temple be as tall and large as a modern one?

The height and size of the shikhara are worked out in the design, and stone temples of great height have been built this way for centuries. A stone temple has its own limits: it cannot rise as high as a skyscraper, but it can certainly be made tall, and the taller it is, the more land it needs.

Which stone do you recommend?

That depends on your tradition, the climate of the site, the carving you want and your budget. We recommend a stone only after seeing your brief, and we explain why, so you can decide with the facts in front of you.

Vastu and the Shilpa Shastra

Do you design temples according to Vastu?

Yes. We design to the traditional rules of temple architecture, the Shilpa Shastra and Vastu, which govern the orientation of the temple, the layout of the plan, the position of the garbhagriha and the proportions of each part. Within those rules we adapt the design to your site, your deity and your community's own tradition.

Which direction should the temple face?

That depends on the deity, the tradition and the site. Many temples face east, but this is not a fixed rule for every temple. We study your plot, its approach roads and the practices of your community before settling the orientation.

What if my plot is irregular or does not suit Vastu?

Many plots are not perfect squares, and we plan for that. We set the temple within the plot so that the main axis, the garbhagriha and the mandapas stay correctly placed, and we use the remaining space for the courtyard, gate and other buildings. If you have not yet bought the land, we can help you choose the plot that suits the temple best.

Who decides the details, the architect or the priest?

Both have a part. We prepare the architectural design and the drawings, and the trust's acharya or priest guides the religious requirements for the deity. We are happy to work with your own Vastu or ritual advisers.

Do Jain, Hindu and other temples follow different rules?

They share the same Nagara traditions of building, but each has its own plan and requirements. A derasar, a Shiva temple and a goddess temple differ in their shrines, garbhagrihas and shikharas, and we design each to its own tradition.

Design and planning

What are the stages of building a temple?

In outline: first the brief and site; then the design and drawings; then approvals; then choosing and ordering the stone; then carving at the workshop; then foundation and site work; then installation of the carved stone; and finally the consecration ceremonies led by your priests. Some stages overlap, and the order can change with the site.

What drawings and visuals will we receive?

A temple is drawn in plans, elevations, sections and carving details, and we also prepare architectural visuals so the committee can visualize the finished temple before it is even built.

How big should our temple be?

The size depends on the deity and tradition, the number of people who will gather on festival days, the land you have and your budget. At Umiya Mata Mandir, for example, the two large mandapas can hold more than 1,000 people at a time. Tell us how many devotees you expect on your busiest day and we will plan the halls, circulation and entrances around that.

How much land do we need?

It depends on the size of the temple, its shikhara, the mandapas and halls, the courtyard, and the parking and facilities you want around it. A tall stone temple with large halls needs more land. Send us the size of your plot and we will tell you what fits on it, or what size to look for if you are still choosing land.

Can the temple be built in phases?

Yes, many temples are built in stages as funds come in. We have worked at Savaliyaji Mandir since 2004, most recently adding an approach gate in 2024, and we keep the stone, colour and carving consistent from one phase to the next. If you plan to build in phases, tell us at the start so the design allows for what comes later.

Can the temple have lifts and easy access for the elderly?

Yes. Umiya Mata Mandir, for example, has two lifts, and we can plan ramps, lifts and wide approaches into the design from the start.

Do you visit the site during construction?

Yes. We visit the site regularly to make sure everything is built exactly as drawn.

Can we change the design once work has begun?

Small changes in the early drawings are easy. Once carving begins, a change means carving again, which is slow and costly, so we ask you to settle the design before stone is cut.

Land, approvals and funding

What do we need in place before the design begins?

A clear site: documents showing the land belongs to the trust or is leased to it, a land use that allows a place of worship, and a survey of the plot. Rules differ by state and city, so please check with your local municipal office and a lawyer before you buy land or commit to a plot. We can look at a plot before you decide.

Do we need a soil test?

Yes. The soil under the temple decides the depth and type of the foundation, and traditional texts also begin by examining the soil. A soil test by a qualified engineer should be done before the foundation is designed.

Will you help with permissions and approvals?

We prepare the technical drawings and 3D visuals that the local authority needs for building permission, along with anything else the application requires. The trust is responsible for land documents, registrations and the application itself, and our team can guide you on what the drawings must show.

Is a stone temple safe in an earthquake?

Safety depends on the foundation, the structure and the way the stone is fitted, and these are planned with the site's soil and earthquake zone in mind. A temple designed and built by an experienced, reliable firm can outlast earthquakes.

Can you help us raise funds for the temple?

Many trusts raise money in stages, and clear drawings, visuals and staged estimates help donors see what they are supporting. We can prepare all of these for you.

Consecration and care

When can the murti be installed?

The murti is installed once the garbhagriha and the rest of the temple are complete, including the pedestal for the murti. Minor touch-ups and iconography outside the garbhagriha can continue after the murti is installed.

Do you conduct the ceremonies?

The pratishtha and other rites are led by your priests or religious leaders. We take part for technical and logistical help, as and when needed.

How do we look after a stone temple?

Inspect it regularly for cracks, open joints, and tell us early if you see any problem. Clean it gently: light dust can be brushed off, and strong chemicals, acids and cement patching should be avoided because they can damage the stone. Ask us before any repair.

Begin

Planning a temple? Let's talk.

Send an enquiry